All Categories


Pages


Effective Ventilation For Your Sub Floor

There are different ways in which structures are set up in order to give them the required strength and stability. A method used to give stability to the floor in a building is the inclusion of a sub floor. A sub floor is the floor that is built on top of floor joists after which a top floor is placed above it. Sub floors are used in order to increase the durability of the top floor and to ensure that the top floor remains level in the long term. It is important to have adequate sub floor ventilation to keep your indoor air fresh and free from pollutants.

Good Sub Floor Construction Practices

The way in which the under floor is constructed plays a big role in determining how effective the sub floor ventilation that is installed will be. A sub floor can either be made from wood or concrete. Before the top floor is constructed, it is important to ensure that the sub floor is completely dry. The floor can then be covered with a material that is damp proof in order to reduce the risks of dampness in the future. You should also ensure that the under floor does not have any debris or dust when the top floor is being installed.

Sub Floor Inspection

If you suspect that your sub floor may have inadequate ventilation, it is a good idea to call in a ventilation expert. The expert will carry out a thorough inspection of your sub floor to check the amount of moisture that is on the timber. This can be done by the use of a moisture meter. He will also check for the presence of timber pests, fungi, mould and mildew and will assess how much the timber in the sub floor has decayed. He will look at the ventilation that is already in place and find out if there is anything obstructing the ventilation points. He will also identify areas in the sub floor where additional ventilation needs to be installed. In case there is water seeping in from the ground or there are broken water pipes causing water to pool in the sub floor, these will need to be addressed.

Installing Adequate Sub Floor Ventilation

Sub floor ventilation gets rid of damp air from the sub floor and replaces it with fresh and drier air from the outside. In order to have sufficient ventilation on your sub floor, a ventilation expert may recommend the use of fans and ducts that are resistant to moisture. The fans get rid of the damp stale air in the sub floor which creates negative pressure that causes the drier air from the outside to flow into the space. Air from the outside flows into the under floor through vents and any spaces that are present.

Getting The Most From Your Ventilation System

In order to get the most from your ventilation system, it is a good idea to run the system during the day. This is because humidity during the day tends to be low due to the high temperatures. This means that the sub floor is likely to have dry air flow into the space. You should also avoid running your ventilation system in wet weather since the air will not be dry enough.

Mould Buster has a great team of experienced and friendly ventilation experts offering the best solutions for sub floor ventilation for any kind of building. Please visit the website http://mouldbuster.com.au/sub-floor-ventilation/ for more details.


About the Author

Egeberg
Jochumsen Nordentoft There are different ways in which structures are set up in order to give them the required strength and stability. A method used to give stability to the floor in a building is the inclusion of a sub

Comments


No comments yet! Be the first:

Your Response



Most Viewed - All Categories